Acrylic Enclosure mod

December 4, 2009mrericboyd 1 Comment »

Inspiration strikes! Skory and I talked months ago about how the big black electronic enclosure box could be replaced with a couple of sheets of super cool acrylic. Now, I’ve done it! It only took about an hour, once I had the 1/8″ thick acrylic in hand. Trace the black box twice, cut with hack saw, drill 4 holes with 5/32 drill bit, use 2 8-32 screws with nuts. Presto chango, awesome North Paw mod! As an extra bonus, the thickness of this new enclosure is reduced to 11/16″, from the 1″ dimension of the JM22 enclosure.

One response to this entry

Join the discussion