Old V1.0 Instructions
PDF of entire instruction set
Building North Paw V1.0
Step 0: Overview
|
Total Kit Contents
- Electronics bag (see Step 2 for complete contents)
- 3 pieces of sticky-back velcro
- 12″ of 10 conductor ribbon cable
- 8″ piece of 1/16″ shrink tubing
- Small piece of stretchy white fabric
- JM22 enclosure
- 3xAAA enclosure
- 10.5″ custom armature enclosure
- HM55B compass module in silver bag
- Sensebridge business card
|
|
Tools you’ll need:
- wire cutters
- wire strippers
- soldering iron, solder
- scissors
- phillips screw driver
- optional: hot air gun
|
|
The assembly consists of 4 step:
Alternately, there is a PDF of entire instruction set
|
Proceed to Step 1: Electronics!
North Paw V1.0, for help contact eric@sensebridge.net