Instructions
Building North Paw V2.0
Step 0: Overview
Note: these are the new V2.0 instructions. You may be looking for the older V1.6 instructions.
 |
Total Kit Contents
- Electronics bag (see Step 1 for complete contents)
- 2 pieces of sticky-back velcro
- 8 sticky-back velcro dots
- 12″ of 10 conductor ribbon cable
- 8″ piece of 1/16″ shrink tubing
- Black enclosure box
- LiPo Battery (blue), in bag with screws which hold circuit board to box
- 10″ custom armature enclosure
- Pololu LSM303DLM 3-axis compass & 3-axis accelerometer breakout board
|
|
Tools you’ll need:
- wire cutters
- wire strippers (we like the small gage ones)
- soldering iron, solder
- clear packing or scotch tape
- optional: hot air gun
|
|
The assembly consists of 3 steps:
|
Proceed to Step 1: Electronics!
North Paw V2.0, for help contact eric@sensebridge.net