Warning: Use of undefined constant user_level - assumed 'user_level' (this will throw an Error in a future version of PHP) in /usr/share/nginx/vhosts/sensebridge.net/html/wp-content/plugins/ultimate-google-analytics/ultimate_ga.php on line 524

Old V1.0 Instructions


Warning: Use of undefined constant user_level - assumed 'user_level' (this will throw an Error in a future version of PHP) in /usr/share/nginx/vhosts/sensebridge.net/html/wp-content/plugins/ultimate-google-analytics/ultimate_ga.php on line 524

PDF of entire instruction set

Building North Paw V1.0
Step 0: Overview

Total Kit Contents

  • Electronics bag (see Step 2 for complete contents)
  • 3 pieces of sticky-back velcro
  • 12″ of 10 conductor ribbon cable
  • 8″ piece of 1/16″ shrink tubing
  • Small piece of stretchy white fabric
  • JM22 enclosure
  • 3xAAA enclosure
  • 10.5″ custom armature enclosure
  • HM55B compass module in silver bag
  • Sensebridge business card

Tools you’ll need:

  • wire cutters
  • wire strippers
  • soldering iron, solder
  • scissors
  • phillips screw driver
  • optional: hot air gun

The assembly consists of 4 step:

Alternately, there is a PDF of entire instruction set

Proceed to Step 1: Electronics!


North Paw V1.0, for help contact eric@sensebridge.net


Warning: Use of undefined constant user_level - assumed 'user_level' (this will throw an Error in a future version of PHP) in /usr/share/nginx/vhosts/sensebridge.net/html/wp-content/plugins/ultimate-google-analytics/ultimate_ga.php on line 524

Warning: Use of undefined constant user_level - assumed 'user_level' (this will throw an Error in a future version of PHP) in /usr/share/nginx/vhosts/sensebridge.net/html/wp-content/plugins/ultimate-google-analytics/ultimate_ga.php on line 524